Procedures:
- if you see notification of the printer on the computer or on display led of the printer prompting " printer ink pad is at the end of service life"
do the following step for reset the ink pad.
- you will use a reset application for different model of epson printer (L120, 220,360,550,565 etc,)
- look for the application of the reseter see image below:
- select the reseter depending of the printer model. for example see image below:
- double click the Adjprog application to open.
- click on select button for setup the settings then click okay. Please see image below:
Note: use a printer cable from your computer/laptop and connect to the printer before doing this procedures.
- then click the Particular adjustment mode. Then select the waste ink pad counter then okay. Please see image below:
- after selecting okay tick check box for main ink pad counter to see the all print out counts, then select initialize. After you see the result an-tick the check box then initialize again,it will prompt you to turn off the printer just turn off the printer. after you click okay it prompt again to turn on the printer then check again the waste ink pad counter if turn back to zero. then if okay your printer will be reset.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article