EPSON L5190: Aligning the Print Head Using the Product Control Panel.

You can align the print head using the control panel on your product.

Step 1. Make sure there are no errors on the LCD screen and the output tray is extended.

Step 2. Load a few sheets of plain paper in the product.

Step 3. Press the  home button, if necessary.

Step 4. Select Maintenance and press the OK button.

Step 5. Select Print Head Alignment and press the OK button.

Step 6. Do one of the following:

1. Select Vertical Alignment and press the OK button.
2. Select Horizontal Alignment and press the OK button.

Step 7. Press the  start button to print an alignment sheet.

Note: Do not cancel printing while you are printing a head alignment pattern.

Step 8. Check the printed pattern and use the arrow and OK buttons to select the number representing the most solid printed pattern for each set on the LCD screen.

Vertical Alignment

Horizontal Alignment

Step 9. Press the OK button when you are finished.