Procedure:
- Make sure to unplug first the printer.
- Remove top cover screws.
- Remove top cover of the printer.
- clean power button using cotton with alcohol
- reassemble the top cover of printer .
- Follow the second step.
- unplug the power adaptor/supply to the printer just pull the white plug (see picture below).
- Discharge printer power adaptor located under the printer.
- After 5mins of discharge try again to plug in the power adaptor/supply to the printer and reassemble.
Note: if the process did not help you to solve this concern Please send a TICKET for the response of out I.T. Technician.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article