ZEBRADESIGNER 3: ALIGN THE BARCODE PRINT TO STICKER PAPER

SAMPLE ISSUE:

STEP 1:

Click the FILE button.

STEP 2:

Under Print Tab, Click the PRINTER SETTINGS button.

STEP 3:

Under ADVANCED SETUP tab, Click the CALIBRATE button, then Click the OK button.

STEP 4:

After calibrating, Click the PRINT button to test if the printout is properly aligned to the sticker.

RESULT:

NOTE:

If the printout to the sticker still not aligned, Repeat Steps 2, Step 3, and Step 4 to CALIBRATE again the printer until the printout to the sticker is aligned.