JWSL Warehouse Network BCP

This Instruction is used only if the internet connection of RCS is down. Take note: you can't access File storage if you use this connection except when you use the Forticlient VPN of RCS

Step 1: First you need to pull out the patch cord of a black port that has a label of "WAN GE4"



Step 2:  You need to connect the patch cord of PLDT router to the port Huawei device that has a label of "WAN GE4" .

Step 3:  There have two Huawei devices on JWSL Warehouse. The upper huawei device is for load planner connection and the below device is for Inbound/outbound connection.

Step 4: If one of those two has no connection just connect the patch cord of pldt to the black port of Huawei that has a label of "WAN GE4"  (Take note: Properly put aside the patch cord that you pull out that we can easily determine ).